thyssenkrupp – PERFORM High-Strength Steel
thyssenkrupp Steel Europe is a major German steelmaker.
Its steel portfolio serves automotive, transport, mechanical engineering and other demanding industrial applications.
Since 2022, Gia Anh (GAC) has been an authorised dealer of thyssenkrupp Steel in Vietnam.
Through this cooperation, GAC supplies high-strength steel and supports customers in selecting material and thickness according to the actual structural requirements of the application.
A different problem from wear
Wear protection is primarily a surface durability problem.
Weight reduction is a structural problem.
Two problems. Two steel families. Do not swap them.
Wear plate is selected primarily for resistance to material loss caused by abrasion and other wear mechanisms.
High-strength structural steel is selected primarily for load-bearing efficiency, allowing engineers to reduce section thickness and tare weight where the design permits.
Understanding that distinction is critical before selecting a steel grade.
PERFORM – High-strength steel for lighter structures
PERFORM is thyssenkrupp Steel’s high-strength micro-alloyed steel range for applications where high load-bearing capacity and weight reduction need to be considered together.
The principle is different from wear protection.
When a structure needs to carry more load, one common response is to increase steel thickness.
But thicker steel increases tare weight.
More tare weight can mean less payload and higher energy consumption.
PERFORM takes another route: increase the strength of the material itself.
Higher yield strength can allow thinner sections to be used in suitable areas while still meeting the required structural load.
For transport and mobile equipment, weight saved in the structure can become additional payload or contribute to lower fuel and energy consumption.
Read four numbers, not one
Not every high-strength steel is suitable for every structure.
Four mechanical properties matter:
- Yield strength – when permanent deformation begins
- Tensile strength – the maximum stress the material can withstand before failure
- Elongation – how much deformation the steel can accommodate before fracture
- Impact toughness – how well the material withstands sudden or dynamic loading
PERFORM combines high yield strength with the formability, weldability and toughness required for practical fabrication.
That matters because a steel grade must work not only on a datasheet, but also through cutting, forming, welding and assembly in a real fabrication shop.
Where PERFORM is used
High-strength steels such as PERFORM are relevant for applications where load-bearing efficiency and structural weight reduction are important.
Typical applications include:
- Refuse trucks
- Tankers
- Container bodies
- Mobile cranes
- Load-bearing frames and structural components
The value of high-strength steel in these applications comes from using material more efficiently rather than simply increasing plate thickness.
How GAC advises on high-strength steel
Not simply by specifying a thicker plate.
GAC first looks at how the structure actually works:
- Yield strength
- Tensile strength
- Elongation
- Impact toughness
- Forming and welding requirements
- Load distribution and operating conditions
Only then are the material grade and plate thickness selected.
The objective is not to use the strongest steel available. It is to use the appropriate strength level where it creates real structural value.
From thyssenkrupp Steel technology to applications in Vietnam
thyssenkrupp Steel provides the metallurgical expertise and high-strength steel platform.
GAC brings those materials into Vietnamese applications through local supply, technical consulting and support in material selection.
The objective is straightforward: reduce tare weight where technically appropriate, maintain the required load-bearing capacity, increase payload potential and improve the operating efficiency of the finished equipment.
For more information about thyssenkrupp Steel and PERFORM high-strength steel, visit the official website: thyssenkupp Steel.
