{"id":7432,"date":"2026-08-07T11:54:14","date_gmt":"2026-08-07T04:54:14","guid":{"rendered":"https:\/\/giaanh.vn\/?page_id=7432"},"modified":"2026-08-12T15:17:29","modified_gmt":"2026-08-12T08:17:29","slug":"kalenborn","status":"publish","type":"page","link":"https:\/\/giaanh.vn\/en\/our-partners\/kalenborn\/","title":{"rendered":"Kalenborn"},"content":{"rendered":"

Kalenborn – ceramics and composite steel<\/span><\/h1>\n

Kalenborn is a German specialist in wear protection materials and engineered solutions for industrial equipment.<\/p>\n

Its portfolio covers metallic, mineral and ceramic materials, hard compounds and engineering plastics. Different material groups are designed for different combinations of abrasion, erosion, impact, temperature and material build-up.<\/p>\n

Gia Anh (GAC) is an authorised Kalenborn dealer in Vietnam<\/strong>, supplying genuine Kalenborn materials together with technical consulting, material selection and wear protection solutions.<\/p>\n

Why a multi-material wear protection supplier matters?<\/h2>\n

Steel is not the answer to every wear problem.<\/p>\n

Some operating points are exposed to temperatures where conventional steel solutions become limited. Some experience high-velocity erosion and require an extremely hard wear surface. Others suffer from material build-up, where smoothness and flow behaviour can matter as much as hardness.<\/p>\n

Different problems require different material systems.<\/p>\n

That is why GAC works with a broad Kalenborn portfolio rather than relying on one material for every wear point.<\/p>\n

Depending on the wear mechanism, impact level, temperature, material build-up and equipment geometry<\/strong>, materials can be selected or combined to match the actual operating conditions.<\/p>\n

\"\"<\/p>\n

Seven material groups. Different working ranges.<\/h2>\n

The right material is not selected by hardness alone.<\/p>\n

Each material group has a different role depending on the wear mechanism and operating environment.<\/p>\n

KALMETALL<\/h3>\n

KALMETALL is a hard overlay welded steel system<\/strong> developed for severe wear conditions where abrasion may occur together with impact.<\/p>\n

Typical applications include chutes, hoppers, pipes, fan housings, cyclones and other components in bulk material handling systems.<\/p>\n

ABRESIST<\/h3>\n

ABRESIST is fused cast basalt<\/strong> with a hard, smooth surface for protection against abrasive wear.<\/p>\n

It is commonly used to line chutes, hoppers, bunkers, pipes and bulk material handling systems. Its low-friction surface can also promote material flow in suitable applications.<\/p>\n

KALOCER<\/h3>\n

KALOCER is a high-alumina ceramic<\/strong> with very high hardness and wear resistance.<\/p>\n

It is designed for plant components exposed to extreme abrasive wear, including cyclones, bunkers, chutes and transfer points.<\/p>\n

Per Kalenborn documentation, KALOCER can operate at temperatures of up to approximately 1,200\u00b0C<\/strong>, depending on the installation conditions.<\/p>\n

KALCOR<\/h3>\n

KALCOR is a zirconium corundum ceramic<\/strong> developed for severe abrasion combined with high or fluctuating temperatures.<\/p>\n

Typical applications include cyclones, hot-material chutes, pipelines and other areas exposed to high particle velocity or thermal cycling.<\/p>\n

KALSICA<\/h3>\n

KALSICA is a silicon carbide ceramic<\/strong> for applications combining severe wear with high thermal loads.<\/p>\n

It is suitable for components such as cyclones, pipelines, distributors and other areas where abrasion and elevated temperatures occur together.<\/p>\n

KALCRET<\/h3>\n

KALCRET is a wear-resistant, cement-bonded high-performance concrete and hard compound<\/strong>.<\/p>\n

Depending on the product form, it can be applied by trowelling, casting or spraying<\/strong>, making it suitable for complex geometries and large wear-exposed surfaces.<\/p>\n

Typical applications include pipes, hoppers, cyclones, chutes and other plant components requiring large-area protection.<\/p>\n

KALCERAM<\/h3>\n

KALCERAM is a hard ceramic material developed for applications where wear resistance and favourable sliding properties are required.<\/p>\n

Its surface characteristics can help reduce material build-up and support more reliable flow in suitable handling applications.<\/p>\n

The strength is not one product<\/h2>\n

Kalenborn’s strength lies in the ability to work with different material systems.<\/p>\n

One production line may contain several wear mechanisms. A high-erosion zone may require ceramic protection, while another location exposed to heavier impact may require a metallic wear protection system.<\/p>\n

The transition between different materials must still be engineered for the actual equipment geometry, loads and installation conditions on site.<\/p>\n

This is where site assessment and application engineering become critical.<\/p>\n

How GAC selects the material<\/h2>\n

Not by hardness alone.<\/p>\n

GAC starts with the conditions at the exact wear point:<\/p>\n